Multi-Garden Grid™ Connection Manifold
Interconnect multiple Garden Grids™ & control each independently!
Interconnect Garden Grids™ In The Same Garden Or In Separate Gardens So They Can All Run Off Of The Same Water Supply.
What It Is – Each of our multi-Garden Grid™ connection manifolds lets you interconnect and independently adjust the water flow for up to (2) neighboring Garden Grids™ AND connect an outgoing garden hose to run to additional Garden Grids™ or manifolds.
See How It Works Here:
How It Works:
- Thread your main garden hose onto the base of the manifold.
- Attach one or two Garden Grids™ to the green water flow valves on the top of the manifold.
- Optionally connect another hose to the base of the manifold to feed off to another Garden Grid™, another manifold, or to simply use as a hose connection point for any other watering needs.
-
- This extra connection point lets you endlessly interconnect as many Garden Grids™ to run off of the same water supply as you want!
-
Example Uses:
- Neighboring Garden Grids™: Say you have a 4×8 Raised Garden Bed and put 2 4×4 Garden Grids in it. One manifold would connect the two Garden Grids together so they can both run off of your one water source. See our 4×8 Raised Garden Kit as an example.
- Separate Garden Grids™: Say you have 4 garden beds that are spaced apart & you place one Garden Grid™ in each. You would connect a manifold to the first three Garden Grids™. You then connect our short garden hoses from manifold to manifold, joining them together. Finally, connect a garden hose from the last manifold directly to the last Garden Grid™.
-
- Tip: Add our water flow valve to the last Garden Grid™ so you can control its water flow more easily.
- The last Garden Grid™ doesn’t necessarily need a manifold since it’s the end of the connection chain. However, you can use one for consistency or if your garden bed is fairly high tall & want to avoid the weight of a hose pulling down on your Garden Grid™.
-
Frequently Asked Questions:
Can I Connect Just One Garden Grid™ To A Manifold?
Yes! Each connection side of the manifold (the green parts on the top) has water flow control valves. These valves let you turn water on or off and all points between. So if you want, you can have a Garden Grid™ connected to just one side of the manifold & leave the other green connection point unused.
This comes in handy if you have multiple gardens that only need one Garden Grid™ & the gardens are spaced apart.
How Do I Interconnect Garden Grids™ That Are Spaced Apart, Using The Manifold?
The bottom of each manifold has an inlet and outlet for garden hoses. Connect a garden hose to the outlet side (capped side) and feed it to your other garden. Connect to another multi-Garden Grid™ connection manifold, or directly to a Garden Grid™.
Customer Reviews
57 reviews for Multi-Garden Grid™ Connection Manifold
Customer Images
Other Customers also purchased…
Full Product Details
Our Multi-Garden Grid™ Connection Manifold lets you interconnect 2 or more Garden Grid™ watering systems to run off one water source. Simply select the height you need, connect your Garden Grids™ and turn on your water. That’s it! The multi-Garden Grid™ connection manifold also has an extra hose attachment area (see black/green cap) so you can continue the water flow to a third Garden Grid™ or another manifold, allowing you to “daisy-chain” all of your garden areas together. Features & Info:
-
-
-
- Each manifold lets you interconnect and independently adjust the water flow for up to two neighboring Garden Grid™ watering systems.
- Connect one of our short garden hoses to the additional manifold port (capped end) and lead it to another Garden Grid™ or manifold, and so on, for larger gardens.
- *Garden Hose Timer and Custom Length Garden Hoses sold separately.*
-
-
Have a question about setting up your garden? Contact us here! We’ll help you figure out exactly what you need.
Multi-Garden Grid™ Connection Manifold
$17.00 – $24.00
(Height Dependent)
Select the height nearest to your garden bed’s height.
Multi-Garden Grid™ Connection Manifold
$17.00 – $24.00
(Height Dependent)
Select the height nearest to your garden bed’s height.
Interconnect Garden Grids™ In The Same Garden Or In Separate Gardens So They Can All Run Off Of The Same Water Supply.
What It Is – Each of our multi-Garden Grid™ connection manifolds lets you interconnect and independently adjust the water flow for up to (2) neighboring Garden Grids™ AND connect an outgoing garden hose to run to additional Garden Grids™ or manifolds.
See How It Works Here:
How It Works:
- Thread your main garden hose onto the base of the manifold.
- Attach one or two Garden Grids™ to the green water flow valves on the top of the manifold.
- Optionally connect another hose to the base of the manifold to feed off to another Garden Grid™, another manifold, or to simply use as a hose connection point for any other watering needs.
-
- This extra connection point lets you endlessly interconnect as many Garden Grids™ to run off of the same water supply as you want!
-
Example Uses:
- Neighboring Garden Grids™: Say you have a 4×8 Raised Garden Bed and put 2 4×4 Garden Grids in it. One manifold would connect the two Garden Grids together so they can both run off of your one water source. See our 4×8 Raised Garden Kit as an example.
- Separate Garden Grids™: Say you have 4 garden beds that are spaced apart & you place one Garden Grid™ in each. You would connect a manifold to the first three Garden Grids™. You then connect our short garden hoses from manifold to manifold, joining them together. Finally, connect a garden hose from the last manifold directly to the last Garden Grid™.
-
- Tip: Add our water flow valve to the last Garden Grid™ so you can control its water flow more easily.
- The last Garden Grid™ doesn’t necessarily need a manifold since it’s the end of the connection chain. However, you can use one for consistency or if your garden bed is fairly high tall & want to avoid the weight of a hose pulling down on your Garden Grid™.
-
Frequently Asked Questions:
Can I Connect Just One Garden Grid™ To A Manifold?
Yes! Each connection side of the manifold (the green parts on the top) has water flow control valves. These valves let you turn water on or off and all points between. So if you want, you can have a Garden Grid™ connected to just one side of the manifold & leave the other green connection point unused.
This comes in handy if you have multiple gardens that only need one Garden Grid™ & the gardens are spaced apart.
How Do I Interconnect Garden Grids™ That Are Spaced Apart, Using The Manifold?
The bottom of each manifold has an inlet and outlet for garden hoses. Connect a garden hose to the outlet side (capped side) & feed it to your other garden. Connect to another multi-Garden Grid™ connection manifold or directly to a Garden Grid™.
Customer Reviews
57 reviews for Multi-Garden Grid™ Connection Manifold
Customer Images
-
Featured Review
This has taken my raised bed gardening to a whole new level. It’s a quality product, looks fantastic and works without any issues. Literally it solved all my problems and I’m thrilled with the products!
(2) (0)-
Thank you, Debra! So happy to hear that!
-
-
Verified review - view original
setup was easy. Connected 6 separate units. The hardest was three units in a U pattern. A couple of hoses tied three separate raised beds together. ran a test with all three beds to test the water pressure, it was fine. Tested each one alone and there was too much pressure so partially closer the valve to get the desired water flow. I still need to test them with water from my rain barrels, however they are put away for the winter. i use a Ryobi hybrid pump the supply water pressure from the rain barrels.
(0) (0)-
Thanks Lawrence! Glad everything worked well for your U shaped garden!
-
-
Verified review - view originalSuper easy to put together and set up. Definitely set up in less than 10 min. I hooked 4 grids together using two manifolds. Bought another set for my next planter too! Highly recommend! I love that you sell custom hoses too. I’ll be getting more to complete my garden.
(0) (0) -
-
Full Product Details
Our Multi-Garden Grid™ Connection Manifold lets you interconnect 2 or more Garden Grid™ watering systems to run off one water source. Simply select the height you need, connect your Garden Grids™ and turn on your water. That’s it! The multi-Garden Grid™ connection manifold also has an extra hose attachment area (see black/green cap) so you can continue the water flow to a third Garden Grid™ or another manifold, allowing you to “daisy-chain” all of your garden areas together. Features & Info:
-
-
-
- Each manifold lets you interconnect and independently adjust the water flow for up to two neighboring Garden Grid™ watering systems.
- Connect one of our short garden hoses to the additional manifold port (capped end) and lead it to another Garden Grid™ or manifold, and so on, for larger gardens.
- *Garden Hose Timer and Custom Length Garden Hoses sold separately.*
-
-
Have a question about setting up your garden? Contact us here! We’ll help you figure out exactly what you need.
Debra Lee Boatwright –
Featured Review
This has taken my raised bed gardening to a whole new level. It’s a quality product, looks fantastic and works without any issues. Literally it solved all my problems and I’m thrilled with the products!
Bryan Traficante (store manager) –
Thank you, Debra! So happy to hear that!
Lawrence (Verified Customer) –
setup was easy. Connected 6 separate units. The hardest was three units in a U pattern. A couple of hoses tied three separate raised beds together. ran a test with all three beds to test the water pressure, it was fine. Tested each one alone and there was too much pressure so partially closer the valve to get the desired water flow. I still need to test them with water from my rain barrels, however they are put away for the winter. i use a Ryobi hybrid pump the supply water pressure from the rain barrels.
Bryan Traficante (store manager) –
Thanks Lawrence! Glad everything worked well for your U shaped garden!
Rita N. (Verified Customer) –
Super easy to put together and set up. Definitely set up in less than 10 min. I hooked 4 grids together using two manifolds. Bought another set for my next planter too! Highly recommend! I love that you sell custom hoses too. I’ll be getting more to complete my garden.
Jennifer (Verified Customer) –
Easy to use!
Christie A. (Verified Customer) –
So easy to install.